Quality control
How We Inspect Every Sweater Order
Checks at every stage from yarn to carton, then a pre-shipment inspection at AQL 2.5 for major and 4.0 for minor defects before the balance is due.

Five checkpoints
Most knitwear defects start early: a wrong yarn lot, a dropped stitch on one panel, an open seam. Catching them at the stage they happen is cheaper and faster than finding them in the carton.

- Incoming yarn
Yarn check at AQL 4.0
Yarn lots are sampled on arrival for colour, count and visible defects before any knitting starts.
- Knitting
Every panel checked
Each panel is checked off the machine for holes, dropped stitches and panel measurements.
- Linking
Seam inspection
Linked seams are checked for open stitches, twisting and strength.
- Finishing
Measured against your chart
After washing and steaming, garments are measured against your size chart. Tolerance ±1.5–2 cm.
- Before shipping
Pre-shipment AQL
Random sampling of packed goods at AQL 2.5 major and 4.0 minor, before the 70% balance is due.
AQL sampling
The numbers behind our final inspection
We sample under ISO 2859-1, general inspection level II, single sampling. The lot passes when defects found stay at or below the acceptance number for each class.
| Defect class | Accepted level | Examples |
|---|---|---|
| Critical | Zero accepted | Wrong fibre-content label, needle or sharp object, broken safety rule |
| Major | AQL 2.5 | Holes, open seams, wrong size, visible shade difference |
| Minor | AQL 4.0 | Loose threads, slight uneven tension, small marks |
| Lot size | Sample | Major accept | Minor accept |
|---|---|---|---|
| 91–150 | 20 | 1 | 2 |
| 151–280 | 32 | 2 | 3 |
| 281–500 | 50 | 3 | 5 |
| 501–1,200 | 80 | 5 | 7 |
| 1,201–3,200 | 125 | 7 | 10 |
What we measure
Knitwear relaxes after washing and steaming, so we measure finished garments, not panels, against your size chart.
BodyChest width, body length, hem width
SleeveSleeve length, cuff width, armhole
NeckNeck width, neck drop, collar height
Tolerance±1.5–2 cm unless agreed otherwise
Also checkedColour against approved sample, labels, packing
Lab testing for your market
We keep existing reports and arranged testing separate, so you always know which is which.
Existing test reports
We hold test reports for some yarns and styles. Each one will be listed here with report number, testing lab, scope and the styles it covers once checked. Ask and we send copies with your quotation.
Testing we can arrange
- Fibre composition
- Colour fastness to washing, rubbing and light
- Azo dyes
- pH value
- EU textile safety requirements
Booked per order with a third-party lab, or the lab your buyer nominates. We do not currently hold factory certifications such as BSCI or OEKO-TEX.
FAQ
Quality questions
Can a third-party inspector check my order?
Tell us when you place the order if you plan to use an inspection company, and we will agree the inspection date with them.
What size tolerance do you work to?
±1.5–2 cm on finished garment measurements, unless a different tolerance is agreed in your order.
Do you hold certifications?
No factory certifications at present. We arrange third-party lab testing per order and share any existing test reports.
How do you keep reorders consistent?
Reorders are checked against the approved sample and size chart from the first order.
Need a specific test for your market?
Tell us where you sell and we arrange the testing your buyers ask for.