AQL 2.5 and AQL 4.0 are acceptance limits from ISO 2859-1. In knitwear, 2.5 usually applies to major defects such as holes or wrong sizes, and 4.0 to minor defects such as loose threads. They set how many random pieces are checked and how many defects are allowed before the whole lot fails.
Key takeaways
- AQL is a sampling plan, not a promised defect percentage.
- Knitwear normally uses 2.5 for major and 4.0 for minor defects; critical defects are never accepted.
- A 300 pcs order is checked on 50 pieces: up to 3 major and 5 minor defects pass.
- Checks on yarn, panels and linking matter more than the final gate.
Every bulk sweater order we ship goes through a final inspection before the balance is paid. The two numbers buyers see on our quotations, AQL 2.5 and AQL 4.0, decide how many pieces are checked and how many defects are tolerated. This guide explains what they mean in practice for knitwear, using the same tables we inspect against.
What AQL actually measures
AQL stands for Acceptance Quality Limit. It comes from ISO 2859-1, the international standard for sampling inspection by attributes. Instead of checking every sweater, an inspector draws a random sample from the packed lot, counts defects in that sample, and accepts or rejects the whole lot based on that count.
The AQL value is not a percentage of defective pieces you will receive. It is the quality level the sampling plan is designed to accept most of the time. A lower AQL means a stricter plan: fewer defects are allowed in the same sample size.
Why knitwear uses two levels
Defects are not equal. A hole in the front panel makes a sweater unsellable; a short loose thread inside a seam does not. So most apparel buyers set different AQL values for different defect classes:
| Class | Typical AQL | Knitwear examples |
|---|---|---|
| Critical | 0 accepted | Wrong fibre-content label, broken needle or sharp object, missing mandatory label |
| Major | 2.5 | Holes, dropped stitches, open seams, wrong size, visible shade difference between panels |
| Minor | 4.0 | Loose threads, slightly uneven tension, small marks that brush off |
That is the standard we use at Jiameidi for every bulk order: AQL 2.5 for major defects and 4.0 for minor defects, with critical defects not accepted at any level.
How many sweaters get checked
The sample size depends on the lot size and the inspection level. Most consumer goods, including knitwear, use general inspection level II. Here is the single-sampling plan for normal inspection at level II, the same table we use:
| Lot size (pcs) | Sample size | Major: accept up to | Minor: accept up to |
|---|---|---|---|
| 91 to 150 | 20 | 1 | 2 |
| 151 to 280 | 32 | 2 | 3 |
| 281 to 500 | 50 | 3 | 5 |
| 501 to 1,200 | 80 | 5 | 7 |
| 1,201 to 3,200 | 125 | 7 | 10 |
Example: you order 300 pcs of one cardigan. The inspector pulls 50 pieces at random. The lot passes if there are no critical defects, no more than 3 major defects and no more than 5 minor defects in those 50 pieces. If a limit is exceeded, the lot fails and must be sorted and re-inspected before shipping.
At our MOQ of 100 pcs per style, a single-style order falls in the 91 to 150 band: 20 pieces checked, 1 major defect accepted. That is why small first orders still get a meaningful inspection.
What AQL does not cover
AQL is a final gate, not a quality system. By the time goods are packed, it is expensive to fix problems. That is why the checks before it matter more:
- Yarn on arrival. We sample incoming yarn lots at AQL 4.0 for colour, count and visible defects before knitting.
- Panels off the machine. Each knitted panel is checked for holes, dropped stitches and panel measurements.
- Linking. Seams are checked for open stitches and twisting before finishing.
- Finished measurements. After washing and steaming, garments are measured against the size chart with a tolerance of ±1.5 to 2 cm.
You can read the full sequence on our quality control page.
Should you ask for a stricter level?
For most fashion knitwear, 2.5 / 4.0 is the market norm. A stricter major level such as 1.5 makes sense for premium yarns like cashmere, where one defect is costly, or for retailers with strict vendor manuals. Stricter levels mean larger effective rejection risk, so they can affect lead time and price. Agree the level in your purchase order before production starts, not at inspection.
Measurement tolerance is a separate question
AQL counts defects; it does not define how far a measurement can drift. Put a tolerance on your size chart. For knitwear, ±1.5 to 2 cm on body measurements is common, because knitted fabric relaxes after washing. Tighter tolerances are possible on fine gauges like 12G and 14G.
A short checklist for your purchase order
- State the AQL for critical, major and minor defects.
- State the inspection level (usually general level II).
- Attach the approved sample reference and the size chart with tolerances.
- Say who inspects: the factory, you, or a third-party company you appoint.
- Agree what happens if the lot fails: sorting, repair and re-inspection before shipping.
If you are planning a first order, our terms of supply set out the defaults, and you can browse ready-to-brand styles that are already proven on our lines.
FAQ
Is AQL 2.5 the percentage of defective sweaters I will get?
No. It is the quality level the sampling plan is designed to accept. The real defect rate in an accepted lot can be lower or slightly higher.
What inspection level should I use for sweaters?
General inspection level II, normal single sampling, is the usual choice for knitwear and consumer goods.
Can I use my own inspector?
Yes. Tell the factory when you place the order so the inspection date can be agreed with your inspector.
Planning an order?
Send us a style code or a photo. We reply within 24 hours with questions, a sample plan and a quotation.
Get a Free QuoteSources
Last reviewed 29 October 2026.