Jiameidi

Brand Building

How to Start a Sweater Brand with a 100-Piece MOQ

You can start a sweater brand with 100 pcs per style by choosing proven ready-to-brand styles or one or two custom designs, splitting each 100 pcs across two colours and three sizes, preparing compliant labels before sampling, and planning about two months from first quote to goods leaving the factory.

Key takeaways

  • Mix ready-to-brand basics with one or two custom signature pieces.
  • Split 100 pcs across one neutral and one brand colour in S, M and L.
  • Pick yarn from your target retail price, not the other way round.
  • Your labels carry the legal fibre and care information, so prepare them early.
  • Allow about two months from quote to handover, plus freight.

A first knitwear collection does not need thousands of pieces. Many brands we work with launch with a few styles at 100 pcs each, learn what sells, and reorder. This guide walks through how to plan that first order so the small quantity works for you instead of against you.

Step 1: Decide your route, ready-to-brand or custom

There are two ways to start with a sweater factory, and the choice decides your speed and your risk.

Ready-to-brandCustom OEM / ODM
Starting pointA style already developed on the factory’s machinesYour photo, sketch, tech pack or sample
Sample time3 to 5 working daysAbout 7 working days, up to 3 rounds
What you changeLabels, hang tag, colour, yarn, sizesEverything: fit, gauge, stitch, yarn, trims
ExclusivityOpen line, others can buy the same constructionYour design, not shown to other buyers
Best forTesting a category quicklySignature pieces that define the brand

A common first collection mixes both: two or three ready-to-brand basics to fill the range, plus one or two custom pieces that make it recognisably yours.

Step 2: Use the MOQ split wisely

Our MOQ is 100 pcs per style, and that 100 can be split across up to 2 colours and 3 sizes. For a first order, that usually means:

  • One neutral that sells everywhere (cream, oat, grey or black) and one colour that carries your brand story.
  • Sizes S, M and L. Relaxed and oversized silhouettes cover more body types per size, which suits a three-size range.
  • Weight the split toward M. A typical first split is roughly 30 / 40 / 30 across S / M / L, adjusted to what you know about your customers.

The real MOQ depends on yarn and how much the style is customised. Special yarns and complex techniques can raise it, so always confirm it in the quotation.

Step 3: Choose yarn by price point, not by name

Yarn is the largest single driver of cost. Decide your target retail price first, then pick a yarn that fits it. Acrylic and cotton suit entry price points; viscose and nylon blends drape well for knit dresses and fitted tops; wool and cashmere blends lift the handfeel for premium ranges. Our yarn guide compares the options.

Step 4: Get your labels right before sampling

With ready-to-brand styles the factory label is never on the garment, so your labels carry the legal information. Prepare three things before the sample:

  1. Main label with your logo, woven or printed.
  2. Care and fibre-content label that meets the rules where you sell. In the US, the FTC enforces the Textile and Wool Acts and the Care Labeling Rule. In the EU, fibre names and composition follow Regulation (EU) No 1007/2011.
  3. Hang tag with price, barcode if you sell through retailers or marketplaces, and brand story.

Step 5: Approve the sample like a customer would

Check the sample on a real person, not only on a table. Look at shoulder width, sleeve length and how the body hangs. Wash it once following your care label. Then approve in writing: the approved sample becomes the reference for bulk and for every reorder.

Step 6: Plan the timeline backwards

StageTypical time
Quotation and questionsWithin 24 hours
Sample3 to 7 working days
Your approvalDepends on you; up to 3 rounds
Bulk production20 to 30 working days after deposit
Inspection and handoverA few days, then FOB Shenzhen or EXW

Add your freight time on top. If you want goods in store for a season launch, start the conversation at least three months ahead.

Step 7: Budget for what is not on the unit price

  • Sample fee. Quoted per style; at our factory it is refunded once your bulk order for that style reaches 200 pcs.
  • Labels and tags. Usually separate from the garment price.
  • Freight and duties. On FOB or EXW terms you pay freight from the port or factory, plus import duties in your country.
  • Testing. If your retailer asks for lab tests such as colour fastness or composition, they are booked per order.

What to send for an accurate first quote

Style codes or photos, quantity per style and colour, sizes, preferred yarn or price level, your market, and when you need the goods at your forwarder. With that, you get a quotation and a sample plan in one reply.

FAQ

Can I mix two styles to reach the MOQ?

The MOQ applies per style. Within one style you can split 100 pcs across up to 2 colours and 3 sizes.

Do I need a tech pack to start?

No. A photo or a sample garment is enough for a custom style, and ready-to-brand styles need only a style code.

Will the factory name be on my sweaters?

Not at Jiameidi. Ready-to-brand styles carry only fibre-content and care labels, and you add your own main label and hang tag.

Planning an order?

Send us a style code or a photo. We reply within 24 hours with questions, a sample plan and a quotation.

Get a Free Quote
Scroll to Top